Crystal Structure and Thermal Properties of Double-Complex Salts [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O.

Here, seven new double-complex salts, [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O types, are synthesised. The crystal structure and composition of DCS (double-complex salts) are studied by SCXRD, XRD, CHN and IR methods. The complex salts of the [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) type can be crystallised both as a crystalline hydrate [M1(NH3)6][M2(C2O4)3]·3H2O (sp. gr. P-3) and as an anhydrous complex (sp. gr. P-1) depending on the synthesis conditions. The process of [Rh(NH3)6][Rh(C2O4)3] formation is significantly dependent on the synthesis temperature. At room temperature, a mixture is formed comprising [Rh(NH3)6][Rh(C2O4)3] and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O, while the [Rh(NH3)6][Rh(C2O4)3] target product crystallises at elevated temperatures. The thermal behaviour of double-complex salts is studied by the STA, EGA-MS, IR and XRD methods. The complete decomposition of complex salts in helium and hydrogen atmospheres resulting in metals or CoxRh1-x solid solutions is achieved at temperatures of 320-450 °C.

Photogeneration of Several Linkage Isomers and Investigation of Forward and Backward Nitro-Nitrito Isomerization Processes in a Palladium Complex.

Photoinduced linkage isomers (PLIs) of the nitro-ligand were generated and comprehensively characterized in a square planar unit [Pd(NH3)3NO2]+ of the complex salts [Pd(NH3)4][Pd(NH3)3NO2][MOx3]·yH2O (M = Cr (Cr), Rh (Rh), Co (Co), Ox = oxalate). Structural (XRD) and spectroscopic (IR, UV-vis) investigations at 10 and 150 K allowed determining the structures of several photoinduced linkage isomers, endo-ONO (PLI1, 2) and exo-ONO (PLI3, 4) isomers generated by irradiation with 365 nm from the initial NO2 (GS), along with the assignment of the infrared (IR) bands to each structural isomer. Based on a combination of these methods, the photo- and thermally induced interplay of PLIs was investigated. Irradiation in the temperature range of 10-80 K induces the formation of both endo- and exo-ONO isomers, while increasing the temperature up to 150 K results in the formation of only endo-ONO isomers. The structural arrangement of the endo-ONO and exo-ONO PLI is strongly influenced by intermolecular interactions due to the partial occupation of a neighboring site by water molecules. The investigation of thermal dynamics of PLIs revealed that the thermal decay of the exo-ONO isomer occurs via two steps exo-ONO → endo-ONO → NO2. The kinetic parameters (Ea, k0) of both decay processes were determined together with the characteristic decay temperatures (Td) by IR spectroscopy. According to the photoinduced dynamics measured by IR spectroscopy, the mechanism of PLI formation in [Pd(NH3)3NO2]+ could be described as NO2 → endo-ONO → exo-ONO.

Preliminary exploration of direct mercury speciation in solid samples by using thermal release coupled to electrothermal atomic absorption spectrometry.

It is known that monitoring of mercury and notably its species is very important to assess their impact and distribution in the environment. In this regard, the development of a methodology for mercury speciation in natural and man-made media is of particular importance. There are a variety of studies in this area associated with the application of thermal release in combination with electrothermal atomic absorption detection for direct mercury speciation in solid samples without preliminary extraction of analytes. Nevertheless, a number of issues remain that hinder its practical application as a reliable analytical method. However, in order to achieve progress in this field, it is necessary to understand the features of the evaporation process itself. The goal of this work is to study the thermal behavior of the most common mercury species in order to eliminate the gaps in this approach. At this stage, studies were carried out using pure substances and their mixtures as a starting point for a subsequent transition to real natural samples. For this the installation scheme was modernized by introducing a module that provides programmable heating of the sample and variation of the heating rate. As a result of the experiments it was shown that the transformation of studied compounds with the examples of mercury chloride, methylmercury chloride, mercury sulfide and mercury sulfate occurs under thermal exposure, which leads to a change in their physicochemical characteristics, but, nevertheless, does not prevent their baseline separation for 30 min using programmable heating mode, which includes a continuous increase in temperature with a subsequent stop until the thermal peak is formed.

Efficient Production of Segmented Carbon Nanofibers via Catalytic Decomposition of Trichloroethylene over Ni-W Catalyst.

The catalytic utilization of chlorine-organic wastes remains of extreme importance from an ecological point of view. Depending on the molecular structure of the chlorine-substituted hydrocarbon (presence of unsaturated bonds, intermolecular chlorine-to-hydrogen ratio), the features of its catalytic decomposition can be significantly different. Often, 1,2-dichloroethane is used as a model substrate. In the present work, the catalytic decomposition of trichloroethylene (C2HCl3) over microdispersed 100Ni and 96Ni-4W with the formation of carbon nanofibers (CNF) was studied. Catalysts were obtained by a co-precipitation of complex salts followed by reductive thermolysis. The disintegration of the initial bulk alloy driven by its interaction with the reaction mixture C2HCl3/H2/Ar entails the formation of submicron active particles. It has been established that the optimal activity of the pristine Ni catalyst and the 96Ni-4W alloy is provided in temperature ranges of 500-650 °C and 475-725 °C, respectively. The maximum yield of CNF for 2 h of reaction was 63 g/gcat for 100Ni and 112 g/gcat for 96Ni-4W catalyst. Longevity tests showed that nickel undergoes fast deactivation (after 3 h), whereas the 96Ni-4W catalyst remains active for 7 h of interaction. The effects of the catalyst's composition and the reaction temperature upon the structural and morphological characteristics of synthesized carbon nanofibers were investigated by X-ray diffraction analysis, Raman spectroscopy, and electron microscopies. The initial stages of the carbon erosion process were precisely examined by transmission electron microscopy coupled with elemental mapping. The segmented structure of CNF was found to be prevailing in a range of 500-650 °C. The textural parameters of carbon product (SBET and Vpore) were shown to reach maximum values (374 m2/g and 0.71 cm3/g, respectively) at the reaction temperature of 550 °C.

Adsorption kinetics of NO2 gas on oxyfluorinated graphene film.

We report the fabrication of high-performance NO2 gas sensors based on oxyfluorinated graphene (OFG) layers. At room temperature, the times of adsorption/desorption of NO2 on/from the surface of thin OFG films are less than 1200 s and can be reduced by increasing the operation temperature. The sensors are capable of detecting NO2 molecules at sub-ppm level with a sensitivity of 0.15 ppm-1 at 348 K. The temperature dependence of the rate constants shows that the simultaneous presence of a large number of fluorine- and oxygen-containing groups on the graphene surface provides the formation of low-energy sites (ΔHa < 0.1 eV) for NO2 adsorption. The combination of the high sensitivity of the sensor and a reasonable adsorption/desorption time of the analyte is promising for on-line monitoring.

Porous Co-Pt Nanoalloys for Production of Carbon Nanofibers and Composites.

The controllable synthesis of carbon nanofibers (CNF) and composites based on CNF (Metals/CNF) is of particular interest. In the present work, the samples of CNF were produced via ethylene decomposition over Co-Pt (0-100 at.% Pt) microdispersed alloys prepared by a reductive thermolysis of multicomponent precursors. XRD analysis showed that the crystal structure of alloys in the composition range of 5-35 at.% Pt corresponds to a fcc lattice based on cobalt (Fm-3m), while the CoPt (50 at.% Pt) and CoPt3 (75 at.% Pt) samples are intermetallics with the structure P4/mmm and Pm-3m, respectively. The microstructure of the alloys is represented by agglomerates of polycrystalline particles (50-150 nm) interconnected by the filaments. The impact of Pt content in the Co1-xPtx samples on their activity in CNF production was revealed. The interaction of alloys with ethylene is accompanied by the generation of active particles on which the growth of nanofibers occurs. Plane Co showed low productivity (~5.5 g/gcat), while Pt itself exhibited no activity at all. The addition of 15-25 at.% Pt to cobalt catalyst leads to an increase in activity by 3-5 times. The maximum yield of CNF reached 40 g/gcat for Co0.75Pt0.25 sample. The local composition of the active alloyed particles and the structural features of CNF were explored.

Synthesis and investigation of the thermal properties of [Co(NH3)6][Co(C2O4)3]·3H2O and [Ir(NH3)6][Ir(C2O4)3].

The complexes [Co(NH3)6][Ir(C2O4)3] and [Ir(NH3)6][Co(C2O4)3]·H2O have previously been synthesized and their thermal properties studied. The [Ir(NH3)6][Ir(C2O4)3] and [Co(NH3)6][Co(C2O4)3]·3H2O complexes considered here are the end members in a series of possible isostructural solid solutions based on the complex salts in the Co-Ir system. Their crystal structures and thermal properties are described in detail, including temperature-dependent in situ X-ray diffraction. During the thermolysis of these compounds, layered metal nanoparticles are formed. Close attention is paid to the details of the [Co(NH3)6][Ir(C2O4)3] synthesis. It has been shown that the formation of this complex salt is temperature dependent; upon heating, a new phase of the K3[Co(NH3)6][Ir(C2O4)3]2·6H2O salt is formed, which incorporates the initial iridium compound into the crystal structure of the double complex salt. The target [Co(NH3)6][Ir(C2O4)3] product is obtained if the synthesis is carried out at room temperature.

Doping of Carbon Nanotubes with Encapsulated Phosphorus Chains.

Single-walled carbon nanotubes (SWCNTs) are a perfect host for the formation of one-dimensional phosphorus structures and to obtain hybrid materials with a large P-C ratio. This work presents a procedure for high-yield phosphorus filling of commercial Tuball SWCNTs and efficient removal of phosphorus deposits from the external nanotube surface. We probed white and red phosphorus as precursors, varied the synthesis temperature and the ampoule shape, and tested three solvents for sample purification. High-resolution transmission electron microscopy and Raman spectroscopy indicated crystallization of interior phosphorus in a form resembling fibrous red phosphorus. An aqueous sodium hydroxide solution allowed removing the majority of external phosphorus particles. Thermogravimetric analysis of the product determined ∼23 wt % (∼10 atom %) of phosphorus, and the X-ray photoelectron spectroscopy (XPS) data showed that ca. 80% of it is in the form of elemental phosphorus. Externally purified SWCNTs filled with phosphorus were used to study the interaction between the components. Raman spectroscopy and core-level XPS revealed p-type SWCNT doping. Valence-band XPS data and density functional theory calculations confirmed the transfer of the SWCNT electron density to the encapsulated phosphorus.

Formation of Catalytically Active Nanoparticles under Thermolysis of Silver Chloroplatinate(II) and Chloroplatinate(IV).

The thermal behaviour of Ag2[PtCl4] and Ag2[PtCl6] complex salts in inert and reducing atmospheres has been studied. The thermolysis of compounds in a helium atmosphere is shown to occur in two stages. At the first stage, the complexes decompose in the temperature range of 350-500 °C with the formation of platinum and silver chloride and the release of chlorine gas. At the second stage, silver chloride is sublimated in the temperature range of 700-900 °C, while metallic platinum remains in the solid phase. In contrast to the thermolysis of Ag2[PtCl6], the thermal decomposition of Ag2[PtCl4] at 350 °C is accompanied by significant heat release, which is associated with disproportionation of the initial salt to Ag2[PtCl6], silver chloride, and platinum metal. It is confirmed by DSC measurements, DFT calculations of a suggested reaction, and XRD. The thermolysis of Ag2[PtCl4] and Ag2[PtCl6] compounds is shown to occur in a hydrogen atmosphere in two poorly separable steps. The compounds are decomposed within 170-350 °C, and silver and platinum are reduced to a metallic state, while a metastable single-phase solid solution of Ag0.67Pt0.33 is formed. The catalytic activity of the resulting nanoalloy Ag0.67Pt0.33 is studied in the reaction of CO total (TOX) and preferential (PROX) oxidation. Ag0.67Pt0.33 enhanced Pt nano-powder activity in CO TOX, but was not selective in CO PROX.

Single-Walled Carbon Nanotubes with Red Phosphorus in Lithium-Ion Batteries: Effect of Surface and Encapsulated Phosphorus.

Single-walled carbon nanotubes (SWCNTs) with their high surface area, electrical conductivity, mechanical strength and elasticity are an ideal component for the development of composite electrode materials for batteries. Red phosphorus has a very high theoretical capacity with respect to lithium, but has poor conductivity and expends considerably as a result of the reaction with lithium ions. In this work, we compare the electrochemical performance of commercial SWCNTs with red phosphorus deposited on the outer surface of nanotubes and/or encapsulated in internal channels of nanotubes in lithium-ion batteries. External phosphorus, condensed from vapors, is easily oxidized upon contact with the environment and only the un-oxidized phosphorus cores participate in electrochemical reactions. The support of the SWCNT network ensures a stable long-term cycling for these phosphorus particles. The tubular space inside the SWCNTs stimulate the formation of chain phosphorus structures. The chains reversibly interact with lithium ions and provide a specific capacity of 1545 mAh·g-1 (calculated on the mass of phosphorus in the sample) at a current density of 0.1 A·g-1. As compared to the sample containing external phosphorus, SWCNTs with encapsulated phosphorus demonstrate higher reaction rates and a slight loss of initial capacity (~7%) on the 1000th cycle at 5 A·g-1.

Tetranitratopalladate(II) Salts with Tetraalkylammonium Cations: Structural Aspects, Reactivity, and Applicability toward Palladium Deposition for Catalytic Applications.

A series of salts (R4N)2[Pd(NO3)4] (R = CH3, C2H5, n-C3H7; 1-3) were synthesized in high yield from a nitric acid solution of palladium. The salts were characterized by a combination of physicochemical methods, and their crystal structures were determined by X-ray diffraction. The conformation of the [Pd(NO3)4]2- anion was studied in detail using crystal structure data and density functional theory calculations. A combination of nonhygroscopicity and stability under normal conditions, together with thermolability, high solubility in various solvents, and the lability of nitrato ligands, makes salts 1-3 valuable starting materials for the synthesis of Pd compounds and the preparation of Pd-containing catalysts. In this work, these applications were illustrated by the synthesis of heteroleptic Pd(II) nitrato complexes with N-donor ligands and the preparation of Pd0.1Ni0.9/SiO2 catalysts, which worked well in H2 generation from hydrazine hydrate. Generally, it was shown that up to several weight percent of Pd can be deposited on various oxide/hydroxide supports using a straightforward chemisorption procedure from acetone solutions of 1-3.

Thermophysical properties of lithium thiogallate that are important for optical applications.

Lithium thiogallate LiGaS2 is one of the most common nonlinear crystals for mid-IR due to its extreme beam strength and wide transparency range; however, its thermophysical properties have not yet been practically studied. Large crystals of high optical quality are grown. DTA revealed features at 1224 K below melting point (1304 K) that are associated with the oxygen containing compounds of the LiGaO2-x S x type. The thermal conductivity of LiGaS2 (about 10.05 W (m-1 K-1)) and band gap value (3.93 eV at 300 K) are found to be the highest in the LiBC2 family. Isotropic points in the dispersion characteristics for the refractive index are found and LiGaS2-based narrow-band optical filters, smoothly tunable with temperature changes, are demonstrated. Intense blue photoluminescence of anionic vacancies V S is observed at room temperature after annealing LiGaS2 in vacuum, whereas orange low-temperature emission is related to self-trapped excitons. When LiGaS2 crystals are heated, spontaneous luminescence (pyroluminescence) takes place, or thermoluminescence after preliminary UV excitation; the parameters of traps of charge carriers are estimated. The obtained data confirm the high optical stability of this material and open up prospects for the creation of new optical devices based on LiGaS2.

One-Dimensional Diiodine-Iodobismuthate(III) Hybrids Cat3{[Bi2I9](I2)3}: Syntheses, Stability, and Optical Properties.

One-dimensional iodine-rich iodobismuthates(III), Cat3{[Bi2I9](I2)3} [Cat = 1,4-MePy (1) and 1-EtBMAP (2)], feature the highest amount of "trapped" diiodine units in polyhalogen-halometalates of p-block elements. Both complexes have narrow optical band gaps (1.55 and 1.63 eV, respectively) and moderate thermal stability.

Preparation of porous Co-Pt alloys for catalytic synthesis of carbon nanofibers.

A simple and convenient procedure for the production of highly dispersed porous Co-Pt alloys to be used as catalysts for the synthesis of nanostructured carbon fibers (CNF) has been developed. The technique is based on the thermal decomposition of specially synthesized multicomponent precursors in a reducing atmosphere. A series of porous single-phase alloys Co-Pt (10-75 at% Pt) have been synthesized. The alloys containing 75 and 50 at% Pt were identified by the x-ray diffraction analysis as the intermetallics CoPt3 and CoPt, respectively. Within the region of 10-35 at% Pt, the synthesized alloys are represented by Co1-x Pt x random solid solutions with face-centered cubic lattice. The alloys obtained are characterized by a porous structure consisting of assembled fragments with a size of 50-150 nm. The obtained alloys were tested in the catalytic chemical vapor deposition of the ethylene to CNF. A significant synergistic effect between Co and Pt in the synthesis of carbon nanomaterials (CNMs) was revealed. The yield of CNF (for 30 min reaction) for catalysts containing 25-35 at% Pt was 30-38 g(CNF)/g(cat), whereas those for Co (100%) and Pt (100%) samples were as low as 5.6 and >0.1 g(CNF)/g(cat), respectively. The produced CNM composed of fibers with a segmented structure was shown to be characterized by a rather high specific surface area (200-250 m2 g-1) and structural homogeneity.

Insight into the thermal decomposition of ammonium hexahalogenoiridates(IV) and hexachloroiridate(III).

Thermal decomposition of (NH4)3[IrCl6]·H2O, (NH4)2[IrCl6] and (NH4)2[IrBr6] in reductive and inert atmospheres has been investigated in situ using quick-EXAFS and temperature-resolved powder X-ray diffraction. For the first time, (NH4)2[Ir(NH3)Cl5] and (NH4)2[Ir(NH3)Br5] have been proven as intermediates of thermal decomposition of (NH4)3[IrCl6]·H2O, (NH4)2[IrCl6] and (NH4)2[IrBr6]. Thermal degradation of (NH4)2[IrCl6] and (NH4)2[IrBr6] is a more complex process as suggested previously and includes simultaneous formation of (NH4)2[Ir(NH3)Cl5] and (NH4)2[Ir(NH3)Br5] intermediates mixed with metallic iridium. In the inert atmosphere, complexes (NH4)[Ir(NH3)2Cl4] and (NH4)[Ir(NH3)2Br4] as well as [Ir(NH3)3Br3] were proposed as possible intermediates before formation of metallic iridium particles.

Luminescent Zn(ii) and Cd(ii) complexes with chiral 2,2'-bipyridine ligands bearing natural monoterpene groups: synthesis, speciation in solution and photophysics.

Mononuclear zinc(ii) and cadmium(ii) complexes, ZnLCl2 (1), CdLCl2 (2), ZnL1Cl2·2H2O (3), and CdL1Cl2·2H2O (4), with chiral ligands containing a 2,2'-bipyridine moiety and natural terpene (+)-limonene (L) or (+)-3-carene (L1) moieties were synthesized. In these complexes the L and L1 ligands are shown to coordinate Zn2+ and Cd2+ ions through the 2,2'-bipyridine moiety. The acetamide group of the ligands interacts with M2+ ions by forming NM2+ and C[double bond, length as m-dash]OM2+ contacts and N-HCl hydrogen bonds with coordinated Cl- ions. In solutions the complexes have several conformers differing by the degree of the turn of the acetamide moiety relative to the ligand core and the type of its interaction with the coordination core. The ligands and complexes exhibit luminescence with the quantum yield increasing in the order: ligand < cadmium(ii) complex < zinc(ii) complex. The complexes 3 and 4 demostrate excitation wavelength independent single-channel fluorescence. As opposed to 3 and 4, the complexes 1 and 2 demonstrate excitation wavelength dependent emission with nanosecond and microsecond lifetimes of the excited states. According to our TD-DFT calculations, an interplay of ligand centered and halide to ligand transitions facilitates two deactivation channels in 1 and 2: S1-S0 and T1-S0.

Light-Induced Sulfur Transport inside Single-Walled Carbon Nanotubes.

Filling of single-walled carbon nanotubes (SWCNTs) and extraction of the encapsulated species from their cavities are perspective treatments for tuning the functional properties of SWCNT-based materials. Here, we have investigated sulfur-modified SWCNTs synthesized by the ampoule method. The morphology and chemical states of carbon and sulfur were analyzed by transmission electron microscopy, Raman scattering, thermogravimetric analysis, X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopies. Successful encapsulation of sulfur inside SWCNTs cavities was demonstrated. The peculiarities of interactions of SWCNTs with encapsulated and external sulfur species were analyzed in details. In particular, the donor-acceptor interaction between encapsulated sulfur and host SWCNT is experimentally demonstrated. The sulfur-filled SWCNTs were continuously irradiated in situ with polychromatic photon beam of high intensity. Comparison of X-ray spectra of the samples before and after the treatment revealed sulfur transport from the interior to the surface of SWCNTs bundles, in particular extraction of sulfur from the SWCNT cavity. These results show that the moderate heating of filled nanotubes could be used to de-encapsulate the guest species tuning the local composition, and hence, the functional properties of SWCNT-based materials.

Tetraammineplatinum(II) and Tetraamminepalladium(II) Chromates as Precursors of Metal Oxide Catalysts.

[M(NH3 )4 ]A (M=Pt, Pd; A=CrO4 , Cr2 O7 ) and [Pt(NH3 )4 (NO2 )(Cr2 O7 )]NO3 complex salts were synthesized and characterized by a number of physicochemical methods of analysis (IR, single-crystal and powder XRD, and simultaneous thermogravimetry and differential scanning calorimetry with evolved gas analysis mass spectrometry). Thermolysis of the salts obtained in a hydrogen atmosphere proceeds with the partial reduction of chromium to a metallic state and the formation of Mx Cr1-x (M=Pt, Pd) metal solid solution with a chromium content of up to 22 at % and chromium(III) oxide. The thermal decomposition of salts in an inert and oxidizing atmosphere passes through the formation stage of the MCrO2 phase with the delafossite structure followed by its subsequent decomposition into chromium(III) oxide and noble metal. Nanosized Pt-Cr2 O3 and Pd-Cr2 O3 composites obtained by the thermolysis of precursor salts in air at 500 °C and being held at this temperature for 1 h showed a high catalytic activity in the CO total oxidation (TOX) and preferential oxidation in the excess of hydrogen (PROX) processes compared with that of monometallic Pt and Pd powders.

Effect of Mo on the catalytic activity of Ni-based self-organizing catalysts for processing of dichloroethane into segmented carbon nanomaterials.

A series of micro-disperse Ni-Mo alloys with the sponge-like structure was prepared by a simultaneous precipitation method followed by sintering of the sediment in H2 atmosphere at 800 °C. According to XRD data, the formation of single-phase solid solution Ni1-xMox took place for the samples with Mo content of 0.6-8.3 wt.%. Synthesized samples were studied in a process of the catalytic CVD of C2H4Cl2 at 550-700 °C. In situ kinetic studies of carbon deposition process were carried out in a flow gravimetric setup equipped with McBain balances. An interaction of Ni-Mo alloys with C2H4Cl2 is accompanied by their rapid disintegration with formation of disperse active particles catalyzing the growth of carbon nanomaterials (CNM). The strong boosting effect of Mo on the catalytic performance of Ni was revealed. The maximum yield of CNM product (8.3 wt.% Mo, 600 °C, 120 min) was as high as 45 g/gM. The study on effect of the reaction temperature on the CNM yield allowed one to define an optimal temperature regime. The impact of Mo concentration upon the morphology, structural features and textural properties of the produced carbon fibers was investigated by means of SEM, TEM, Raman spectroscopy and low-temperature nitrogen adsorption. The role of chemisorbed chlorine species in a pulse-to-pulse regime of the segmented carbon filaments formation was discussed.

Percolative Composites with Carbon Nanohorns: Low-Frequency and Ultra-High Frequency Response.

We systematically studied the electromagnetic properties of carbon nanohorns (CNHs) and polystyrene composites filled with CNHs in static regime, low frequency and microwave regions. CNHs were synthesized using the direct current arc-discharge method using solid graphite rods and graphite rods filled by melamine mixed with graphite powder. Transmission electron microscopy and thermo-gravimetric analysis showed that CNH agglomerates are the main product, while the addition of melamine promotes the formation of graphite balls. Graphitic contamination causes the internal leakage of inter-agglomerate capacity, lowering the permittivity and enhancing the conductivity of composites. The permittivity of CNH/polystyrene composites increases with the filler fraction, and near the dielectric threshold electromagnetic characteristics of the composites exhibit critical behaviour. Our results suggest that CNHs with relatively high values of permittivity and contact resistance could be used as high-k materials.